Izdelki za olje in (173)

For cleaning and care of metal surfaces Dismantling rusted-in parts Protects electrical contacts Temporary corrosion protection for bare metal surfaces Elimination of squeaking noises Lubrication of friction points at moving machine parts Advantages and benefits Broad range of uses (6-fold action) Highly effective due to very good creep properties Also infiltrates strong oil and greasy soiling Good lubricating properties thanks to high oil percentage Displaces moisture Also available as spray version OKS 601 Operating temperature:-30 °C ➝ +60 °C/150 °C Density (20 °C):0.81 g/ml Base oil viscosity (40 °C):approx. 3 mm²/s Salt spray test:> 50 h Coefficient of friction SRV:µ = 0.09

Drop lubrication of cutting tools at machining work on ferrous and non-ferrous metals, for example during drilling, thread cutting, sawing, milling, punching and nibbling Advantages and benefits Reduces friction and required force Permits high continuous load and higher cutting speeds Allows optimal cutting surfaces Extend tool lives through reduction in wear Neutral behaviour toward machine coatings Free of chlorine and heavy metals Low tendency to form oil mist OKS 390 is suitable for use with the OKS Airspray system Also available as spray version OKS 391Apply a sufficient quantity of OKS 390 to the tool or machining point using a brush, drip oiler or oil can. Spray on sufficiently OKS 391 spray. After use OKS 390 can be removed with OKS 2610/OKS 2611 universal cleaner. Caution: Check compatibility before using on non-ferrous metals. Density (20 °C):0.87 g/ml Viscosity (40 °C):22 mm²/s

Sacha Inchi Öl ist ein geblich, bis bernsteinfarbenes Öl. Keine andere Pflanze liefert so viel Omega-3-Fettsäuren wie Sacha Inchi. Sacha Inchi Öl bio ist ein hochwertiges Pflegeöl, das vielfältig eingesetzt werden kann. Es ist wunderbar geeignet für die Pflege entzündlicher, trockener und reifer Haut. Es erhöht die Hautelastizität, wirkt stark zellregenerierend und zellaktivierend. Eine Verbesserung des Hautbildes verspricht Sacha Inchi Öl bio bei Hautreizungen, Entzündungen, Allergien und neurodermitischer Haut. Es begrenzt die Dehydrierung der Haut und stärkt das natürliche Gleichgewicht.Die pflegenden Eigenschaften unseres Sacha Inchi Öls wurden in einer kosmetischen Studie im Oktober 2015 bestätigt. Die Ergebnisse können gerne bei uns angefordert werden. INCI: Plukenetia Volubilis Seed Oil Inhaltsstoffe: C16:0 Palmitinsäure: 2-8% C18:0 Stearinsäure: 1-5 % C18:1 Ölsäure: 8-14 % C18:2 Linolsäure: 28-45 % C18:3 Alpha-Linolensäure: 40-58 % Verpackung: Ab 1 kg erhältlich

Lubrication of chains and machine elements operated outdoors Multi Oil also at higher temperatures Advantages and benefits Good lubricating properties Good creep capacity Biodegradable VOC-free Can be used up to 160°C Silicone-free Percentage of renewable raw materials > 90% Spray version OKS 8601 Operating temperature:-5 °C → +160 °C Density (20 °C):0.92 g/ml Viscosity (40 °C):35 - 40 mm²/s

Castrol Almaredge 230 K Water-miscible high-performance cooling lubricant Description Castrol Almaredge 230 K is a water-miscible high-performance cooling lubricant that was formulated without boron, chlorine and formaldehyde releasers. It contains an additive package that improves machine performance and surface quality, ensures excellent stability and reduces machining costs. Castrol Almaredge 230 K is suitable for both central systems and individual systems. Application Castrol Almaredge 230 K was specifically developed for machining aluminum alloys, but it can also be used for machining low to medium alloy steels . Product number:2108307 Container size:20 Product group:Water-miscible cooling lubricants

Drop lubrication of cutting tools at machining work on ferrous and non-ferrous metals, for example during drilling, thread cutting, sawing, milling, punching and nibbling Advantages and benefits Reduces friction and required force Permits high continuous load and higher cutting speeds Allows optimal cutting surfaces Extend tool lives through reduction in wear Neutral behaviour toward machine coatings Free of chlorine and heavy metals Low tendency to form oil mist Apply a sufficient quantity of OKS 390 to the tool or machining point using a brush, drip oiler or oil can. Spray on sufficiently OKS 391 spray. After use OKS 390 can be removed with OKS 2610/OKS 2611 universal cleaner. Caution: Check compatibility before using on non-ferrous metals. Density (20 °C):0.87 g/ml Viscosity (40 °C):22 mm²/s

Highly adhesive lubrication of moving parts, e.g. valve spindles, piston rods, wire cables, drag cables, drive and conveyor chains, hinges and guides, at highly corrosive conditions in food processing technology Temporary corrosion protection of ferrous and non-ferrous metals, in particular in highly corrosive atmospheres, such as industrial atmospheres, outdoor weathering under roofs of semi-finished products and finished products Shipping protection of packed and unpacked machines and machine parts, apparatuses and equipment goods under extreme climatic conditions Advantages and benefits Highly adhesive oil with very good creep and lubrication properties Optimal corrosion protection through high effectiveness of the corrosion protection additive After the solvent has dried, forms a transparent, highly adhesive oil film Contains non-ferrous metal deactivator NSF H1-registered Also available as spray version OKS 3601 Operating temperature:-40 °C → +80 °C Density (20 °C):0.81 g/ml Viscosity (40 °C):> 21.5 mm²/s Salt spray test:> 100 h

Lubrication wherever good penetration capacity is the only possibility for relubrication, for example at joints, hinges, linkages, levers and guides Lubrication of machine elements subjected to moisture, for example at conveying systems, packaging machines, automatic filling machines, etc. Chains in a dusty environment Advantages and benefits Light-coloured High lubrication effect due to optimum product formula Good creep properties, thus easy penetration even in narrow, hard-to-reach lubricating points Good lubricating and pressure absorption capacity Excellent corrosion protection Good wear protection, also in comparison to higher-viscosity oils without solid lubricants Broad range of uses in all maintenance sectors Operating temperature:-30 °C → +60 °C/150 °C Density (20 °C):0.82 g/ml Viscosity (40 °C):18 mm²/s Coefficient of friction SRV:µ = 0.08 Wear SRV:0.002 mm³ Salt spray test:> 150 h

Lubrication wherever good penetration capacity is the only possibility for relubrication, for example at joints, hinges, linkages, levers and guides Lubrication of machine elements subjected to moisture, for example at conveying systems, packaging machines, automatic filling machines, etc. Chains in a dusty environment Advantages and benefits Light-coloured High lubrication effect due to optimum product formula Good creep properties, thus easy penetration even in narrow, hard-to-reach lubricating points Good lubricating and pressure absorption capacity Excellent corrosion protection Good wear protection, also in comparison to higher-viscosity oils without solid lubricants Broad range of uses in all maintenance sectors Also available as spray version OKS 671 Operating temperature:-30 °C → +60 °C/150 °C Density (20 °C):0.82 g/ml Viscosity (40 °C):18 mm²/s Coefficient of friction SRV:µ = 0.08 Wear SRV:0.002 mm³ Salt spray test:> 150 h

Specifications/Approvals: Zinc-free HLP hydraulic oils in accordance with DIN 51 524-2. Good demulsifying ability, high aging stability, corrosion protection and wear protection ability. Product number:1706680 Container size:208 Product group:Hydraulic oils

Cora®Oil is an oleophilic polyster fleece and a unique technical innovation! Cora®Oil is a high quality thermally bonded polyester nonwoven and capable of separating oil and water. This allows oils to be completely filtered out of water. Another advantage: Cora®Oil can be used in all common band filters. Weight range:95-150 g/m2 Thickness:1,0-1,2 mm Oil adsorption factor:7-9,2 Composition:polyester Temperature max:120°C

Waste oil collection tray - 95 l mobile specification Mobile Connection plug, size 4, G 3/4" female (19 774), for Hydraulic coupling, size 4, G 3/4" female (19 770) Drain cock (19 786) Product number:1636134 Container size:1 Product group:Miscellaneous

Waste oil collection/extractor-75 l Venturi-mobile specification Compressed air is pumped into the container via the Venturi block a vacuum is created Manometer/vacuum meter for displaying pressure and negative pressure Oil is extracted via the dipstick opening Level indicator Safety pressure relief valve permanently set to 0.5 bar, with throttle valve Plug nipple for Rectus coupling, type 26, NW 7.2 mm (20 062), ball valve Suction hose, 2 m, with spiral spring Suction probes, Ø 5/6/8 mm With adapter for BMW, Mercedes, VW, Audi and Smart Probe holder Transparent dispensing hose, 2 m, with Steel outlet elbow, ball valve Collection funnel with removable sieve and additional coarse sieve Solid push handle 2 fixed wheels, 2 steering wheels Pressure evacuation Container made of 1.5 mm sheet steel With metal apron to protect against damage Painted with oil-resistant hydrostructure varnish With height-adjustable oil collecting funnel For spare parts see Venturi block (04 426) Product number:1614677 Container size:1 Product group:Miscellaneous

Mineral oil-based transmission fluid for applications in which performance class API GL-4 is required. Approved for ZF manual transmissions. Advantages high thermal stability to protect against deposits and oil thickening ensures the operational safety and long service life of the lubricant and unit excellent wear protection and load-carrying capacity for long service lives Specifications API GL-4 MAN 341 Type Z2 ZF TE-ML 02B, 17A Container size:60 Product number:1655402

Parting agent at foundry operations injection moulding, blowing and extruding processes of plastics and elastomer Avoids the sticking of e.g. adhesives and sealing excess or water wetting Sliding agent against noisy rubbing of plastics, elastomers and metals together or against each other Lubrication of cutting edges in the paper, cardboard, veneer layer and textile processing machines For easy retracting of plastic and rubber profiles, e.g. in the door and window production Advantages and benefits High efficiency because of excellent netting of the surface and building of extremely thin lubricating films Separating effect with antistatic properties Manifold applications for permanent lubrication, protection, maintaining and impregnation Neutral behaviour against plastic and elastomers Resistant against water and atmospheric influences Operating temperature:-50 °C → +200 °C Density (20 °C):0.96 - 0.97 g/ml Viscosity (25 °C):100 mm²/s

Lubrication of chains, hinges, joints, clamping and drying frames or slideways at higher temperatures Suitable for conveying systems in painting, stoving, drying and cooling bed installations Advantages and benefits Highly effective due to optimum wear protection and outstanding oxidation properties Resistant to water and steam Good creep properties Very good adhesion and lubrication effect with no tendency to drip Also available as spray version OKS 3521 For optimum effect, clean the surfaces. Best way is to clean mechanically first and then with OKS 2610/OKS 2611 universal cleaner. Apply OKS 352 with a brush, drip oiler or by immersion or using a suitable automatic lubrication system to locations to be lubricated. Spray OKS 3521 on evenly. Allow excess to drip off and wait for lubricant to penetrate before resuming operation. Observe the machine manufacturer's instructions. Assess the lubrication frequency and quantity on basis of service conditions Operating temperature:-10 °C → +250 °C Density (20 °C):0.90 g/ml Viscosity (40 °C):270 mm²/s Four-ball test rig (welding load):2,400 N

Standard gear oil of so-called “moderate hypoid gear oils” for manual gearboxes, axle drives, transfer cases, overdrive gearboxes, overdrive clutches and steering systems. Application suitable for modern gearbox designs that do not require fully synthetic gearbox oil. Excellently suited for historic vehicles with manual gearboxes, also in conjunction with overdrive clutches, e.g. Laycock (note manufacturer's specifications). Specifications API GL-4 MB approval 235.1 ZF TE-ML 17A Container size:208 Product number:1508027

Lubrication of closed toothed gearin Liquid lubrication of chains, joints, guides, rolling and friction bearings Suitable for immersion-bath, immersion-bath circulation and injection lubrication Advantages and benefits NSF H1-registered Good ageing and oxidation stability through optimal additives Cold and hot water resistant Resistant to water steam, disinfectants and cleaning agents Wide operating temperature range Shear-stable and low-foaming Good wear protection Good corrosion protection Long economic operating times MOSH-/MOAH-free Operating temperature:-30 °C → +120 °C Density (20 °C):0.86 g/ml Viscosity (40 °C):220 mm²/s FZG damage level:power level > 12

Hydraulic oil for use in all areas of the food processing technology Compressor oil for screw and multiple vane rotary vacuum pumps at required oil ISO VG 32 Lubrication of other machine elements, such as rolling and friction bearings in the food processing technology Advantages and benefits NSF H1 registered Long operating times through excellent oxidation stability Good low-temperature behaviour Wide operating temperature range Resistant to cold and hot water, water steam, disinfectants and cleaning agents Reduces friction and wear Good corrosion protection Free of mineral oil Conforms to VDL requirements Operating temperature:-45 °C → +135 °C Density (20 °C):0.83 g/ml Viscosity (40 °C):32 mm²/s

Lubrication of chains, joints and slideways at high temperatures Conveying systems in painting, stoving and drying systems Food-processing machines Advantages and benefits Can be used up to 250°C NSF H1 registered, conforms to the requirements of the Hazard Analysis Critical Control Points (HACCP) method in the food processing industry Good adhesion on metal surfaces Excellent water resistance Excellent oxidation properties Excellent wear protection Also available as spray version OKS 3571 MOSH/MOAH-free Operating temperature:-10 °C → +250 °C Density (20 °C):0.87 g/ml Viscosity (40 °C):300 mm²/s

Lubrication of chains, joints and slideways at high temperatures Conveying systems in painting, stoving and drying systems Food-processing machines Advantages and benefits Can be used up to 250°C NSF H1 registered, conforms to the requirements of the Hazard Analysis Critical Control Points (HACCP) method in the food processing industry Good adhesion on metal surfaces Excellent water resistance Excellent oxidation properties Excellent wear protection MOSH/MOAH-free Operating temperature:-10 °C → +250 °C Density (20 °C):0,87 g/ml Viscosity (40 °C):300 mm²/s

Parting agent at foundry operations injection moulding, blowing and extruding processes of plastics and elastomer Avoids the sticking of e.g. adhesives and sealing excess or water wetting Sliding agent against noisy rubbing of plastics, elastomers and metals together or against each other Lubrication of cutting edges in the paper, cardboard, veneer layer and textile processing machines For easy retracting of plastic and rubber profiles, e.g. in the door and window production Advantages and benefits High efficiency because of excellent netting of the surface and building of extremely thin lubricating films Separating effect with antistatic properties Manifold applications for permanent lubrication, protection, maintaining and impregnation Neutral behaviour against plastic and elastomers Resistant against water and atmospheric influences Operating temperature:-50 °C → +200 °C Density (20 °C):0.96 - 0.97 g/ml Viscosity (25 °C):2,000 mm²/s

Lubrication of closed toothed gearing Liquid lubrication of chains, joints, guides, rolling and friction bearings Suitable for immersion-bath, immersion-bath circulation and injection lubrication Advantages and benefits NSF H1 registered Good ageing and oxidation stability through optimal additives Cold and hot water resistant Resistant to water steam, disinfectants and cleaning agents Wide operating temperature range Shear-stable and low-foaming Good wear protection Good corrosion protection Long economic operating times MOSH-/MOAH-free Operating temperature:-30 °C → +120 °C Density (20 °C):0.85 g/ml Viscosity (40 °C):320 mm²/s FZG damage level:power level > 12

Parting agent at foundry operations injection moulding, blowing and extruding processes of plastics and elastomer Avoids the sticking of e.g. adhesives and sealing excess or water wetting Sliding agent against noisy rubbing of plastics, elastomers and metals together or against each other Lubrication of cutting edges in the paper, cardboard, veneer layer and textile processing machines For easy retracting of plastic and rubber profiles, e.g. in the door and window production Advantages and benefits High efficiency because of excellent netting of the surface and building of extremely thin lubricating films Separating effect with antistatic properties Manifold applications for permanent lubrication, protection, maintaining and impregnation Neutral behaviour against plastic and elastomers Resistant against water and atmospheric influences Operating temperature:-50 °C → +200 °C Density (20 °C):0.96 - 0.97 g/ml Viscosity (25 °C):50 mm²/s

High-pressure gearbox oil in Aral synthesis technology. for use in manual transmissions, mechanical transmissions and steering systems use in commercial vehicles also for extended oil change intervals (please note manufacturer's instructions) Specifications API GL-4 MAN 341 Type Z4 ZF TE-ML 01L, 02L, 16K Container size:20 Product number:1507983

Aral gear oil SNS-AT 75W-90 is a fully synthetic manual transmission oil for commercial vehicles and is particularly suitable for use in Mercedes-Benz of the Actros, Axor and Atego series. Advantages Excellent viscosity - temperature behavior in a wide temperature range Very good wear protection, even under severe operating conditions Excellently good synchronous behavior, especially in MB commercial vehicle transmissions Particularly resistant to aging Specifications API GL-4 MB Approval 235.11 Container size:20 Product number:1507999

Lubrication of closed toothed gearing Liquid lubrication of chains, joints, guides, rolling and friction bearings Suitable for immersion-bath, immersion-bath circulation and injection lubrication Advantages and benefits NSF H1 registered Good ageing and oxidation stability through optimal additives Cold and hot water resistant Resistant to water steam, disinfectants and cleaning agents Wide operating temperature range Shear-stable and low-foaming Good wear protection Good corrosion protection Long economic operating times MOSH-/MOAH-free Operating temperature:-25 °C → +120 °C Density (20 °C):0.86 g/ml Viscosity (40 °C):680 mm²/s FZG damage level:power level > 12

can no longer be sold, has expired for 6 years ; Dispose of according to Castrol Specifications/Approvals: High-performance HLP hydraulic oils in accordance with DIN 51524-2 with very good oxidation and wear protection, excellent air and water separation properties and low tendency to foam. Product number:1590804 Container size:208 Product group:Hydraulic oils

Specifications/Approvals: High-performance HLP hydraulic oils in accordance with DIN 51524-2 with very good oxidation and wear protection, excellent air and water separation properties and low tendency to foam. Product number:1541151 Container size:208 Product group:Hydraulic oils

Parting agent at foundry operations injection moulding, blowing and extruding processes of plastics and elastomer Avoids the sticking of e.g. adhesives and sealing excess or water wetting Sliding agent against noisy rubbing of plastics, elastomers and metals together or against each other Lubrication of cutting edges in the paper, cardboard, veneer layer and textile processing machines For easy retracting of plastic and rubber profiles, e.g. in the door and window production Advantages and benefits High efficiency because of excellent netting of the surface and building of extremely thin lubricating films Separating effect with antistatic properties Manifold applications for permanent lubrication, protection, maintaining and impregnation Neutral behaviour against plastic and elastomers Resistant against water and atmospheric influences MOSH/MOAH-free NSF H1-registered Operating temperature:-50 °C → +200 °C Density (20 °C):0.96 - 0.97 g/ml Viscosity (25 °C):1,000 mm²/s